Replacement cartridge for tap mixer diameter 40 Hydroplast G40
€9.35
Tax included
G40
Buy it now and it will be shipped between 3 and 4 days with T.W.S. Express Courier
SHIPPING COST IN EUROPE STARTING FROM €9.99
Complete the cart and the costs will be calculated
Also order by phone +39 0322 097686
Chiama
Discover the benefits of B2B
Purchase with up to 5% discount
Replacement Cartridge For Mixer Diameter 40 Hydroplast G40
Features
Brass rod with plastic adapter,
square 10x10.5
Temperature limiting ring
maximum
Long Life silencer
Opening angle: 24°
Mixing angle: 100°
Installation tips
To ensure the best functioning and long life of the cartridge:
the seat of the tap: must be clean and free of incrustations, avoid grease, oil, paint and solvents
the hole in the tightening nut must be approximately 0.20 mm larger than the diameter of the cartridge collar
tightening: the ring nut must screw freely but without play and rest on the entire surface of the cartridge. Tighten with a torque of 1 ÷ 1.2 Kgm
(10 ÷ 12 Nm) to avoid unnecessary overloads and guarantee greater smoothness of operation
test: during tests without water, avoid repeated and improper activations. Avoid unnatural overloads on the lever even during packaging, transport and installation
installation: hot water temperature max 80°C, recommended 60-65°C. Supply pressure min. 0.1 bar, max 5 bar continuous, max 10 bar
occasional. Pressure difference between hot and cold water: recommended the minimum possible (max 1.5 bar).
We recommend mounting filters on the water inlets.
G40