- Home
- Spare Parts
- Cartridges for mixers
- Replacement cartridge for tap mixer diameter 35 Hydroplast GA35-11000
Replacement cartridge for tap mixer diameter 35 Hydroplast GA35-11000
Buy it now and it will be shipped between 3 and 4 days with T.W.S. Express Courier
Also order by phone +39 0322 097686
Replacement Cartridge For Mixer Diameter 35 Hydroplast GA35-11000
Features
Hydroplast GA35 open type cartridge.
9x9 square brass handle pin with upper thread for fixing screw.
Base with distributor with double fixing pin.
HYDROPLAST Original Replacement.
Installation tips
To ensure the best functioning and long life of the cartridge:
the seat of the tap: must be clean and free of incrustations, avoid grease, oil, paint and solvents
the hole in the tightening nut must be approximately 0.20 mm larger than the diameter of the cartridge collar
tightening: the ring nut must screw freely but without play and rest on the entire surface of the cartridge. Tighten with a torque of 1 ÷ 1.2 Kgm (10 ÷ 12 Nm) to avoid unnecessary overloads and ensure greater smoothness of operation
test: during tests without water, avoid repeated and improper activations. Avoid unnatural overloads on the lever even during packaging, transport and installation
installation: hot water temperature max 80°C, recommended 60-65°C. Supply pressure min. 0.1 bar, max 5 bar continuous, max 10 bar
occasional. Pressure difference between hot and cold water: recommended the minimum possible (max 1.5 bar).
We recommend mounting filters on the water inlets.
Specific References
Anonymous customer published the 29/07/2022 following an order made on 06/07/2022
Le cartucce nel pacco erano prive di confezione sigillata. Le ho installate e per ora vanno bene.